Skip to content

3D Printed

Xiaomi Redmi Pro 2 case – 3D printed

The Xiaomi Redmi Pro 2 it’s a nice and cheap phone. Sadly, this chinese device it’s barely going outside china as yet, which means that most accessories design for it are scarce if not nonexistent in retail stores. DOWNLOADTHINGIVERSE Phone cases are individually designed for each manufacturer and model, but a simple measure and design process may allow you to create costum parts for any device.  This case was designed to offer protection and easy use to the phone, note that… Read More »Xiaomi Redmi Pro 2 case – 3D printed

Dynamic 3D Printed Market and Eraser tool for industrial robot

This industrial robot tool uses an assembly of printed parts, springs and a common marker to paint on any surface with the precision expected on a industrial robot tool.  DOWNLOAD    THINGIVERSE The body uses common whiteboard marker (about 20 mm in diameter or less) and requires a spring to ensure that the point of the marker sticks out of the tool, this gives the tool a constant contact force and good drawn paths. The eraser plate uses common pen springs (retractable… Read More »Dynamic 3D Printed Market and Eraser tool for industrial robot

thumbnail glock flag

3D printed 9 mm Chamber Safety Flag for Glock handgun

Even if a gun doesn’t have a magazine it could still have a bullet in the chamber and it is potentially dangerous, there is no indication in most guns to check if there is a live round on the gun, the user must then operate the gun in order to make sure is safe. Remember to always perform multiple safety checks on any gun you need to handle. A Chamber Safety Flag is a tool which indicates that a weapon… Read More »3D printed 9 mm Chamber Safety Flag for Glock handgun

printedocarinathumbnail

3D printed Ocarina – Zelda songs

Fully playable ocarina printed on PLA using a RepRap Prusa I3 3D Printer. Operation Description and files download to recreateOriginal 3D design taken from: by Seggybop Material: PLA Color: Clear Yellow Nozzel Temperature: 230°C Bed Temperature: 50°C Nozzel Diameter: 0.4 mm Printing Speed: 50 mm/s Time Printing: 6h7m (A) + 6h56m (B) Layer Height: 0.1 mm Total Layers: 279 (A) + 437 (B) Total Lines: 360118 (A) + 444728 (B) Filament Needed: 12807 mm (A) + 14312 mm (B) Download… Read More »3D printed Ocarina – Zelda songs

3Dprintedtriforcethumbnail

3D printed Triforce Medalion – Zelda Ocarina Of Time

Zelda’s Triforce Medallion printed on PLA using a RepRap Prusa I3 3D Printer. Operation Description and files download to recreate: Material: PLA Color: Clear Yellow Nozzel Temperature: 230°C Bed Temperature: 50°C Nozzel Diameter: 0.4 mm Printing Speed: 50 mm/s Time Printing: 6h20m Layer Height: 0.1 mm Total Layers: 68 Total Lines: 47967 Filament Needed: 3270 00 Download Files