Skip to content

Xiaomi Redmi Pro 2 case – 3D printed

The Xiaomi Redmi Pro 2 it’s a nice and cheap phone. Sadly, this chinese device it’s barely going outside china as yet, which means that most accessories design for it are scarce if not nonexistent in retail stores. DOWNLOADTHINGIVERSE Phone cases are individually designed for each manufacturer and model, but a simple measure and design process may allow you to create costum parts for any device.  This case was designed to offer protection and easy use to the phone, note that… Read More »Xiaomi Redmi Pro 2 case – 3D printed

Dynamic 3D Printed Market and Eraser tool for industrial robot

This industrial robot tool uses an assembly of printed parts, springs and a common marker to paint on any surface with the precision expected on a industrial robot tool.  DOWNLOAD    THINGIVERSE The body uses common whiteboard marker (about 20 mm in diameter or less) and requires a spring to ensure that the point of the marker sticks out of the tool, this gives the tool a constant contact force and good drawn paths. The eraser plate uses common pen springs (retractable… Read More »Dynamic 3D Printed Market and Eraser tool for industrial robot

thumbnail

OZER Hexapod V-0.1 Open-Hardware, modular 3D printed robot using Raspberry Pi

OZER is a work in progress to develop a totally functional hexapod for exploring functions on unstructured terrains. Keeping as main objectives the development of a low cost, easy to construct, assemble and operate structure which allows the reconfiguring of the platform for new uses. In this version (V-0.1) the robot is able to perform basic operations such as standing, and walking; the control set is command through SSH connection with a feedback video feed form the Raspberry Pi camera… Read More »OZER Hexapod V-0.1 Open-Hardware, modular 3D printed robot using Raspberry Pi

Raspberry Pi: Configuring SSH, VNC and Camera Module Streaming

This tutorial resume common steps to setup a basic connection for a Raspberry Pi board to the net using SSH, VNC and video streaming from a camera module. Most of this information is broadly available on the internet with this article being a review to easy and particular implementation. Prepariong the Raspberry Pi Basic setup: Raspberry Pi board. SD min 4Gb. Download Software Camera module with Flex Connector. Charcher or DC supply. Wi-Fi dongle or ethernet cable. Here how to… Read More »Raspberry Pi: Configuring SSH, VNC and Camera Module Streaming

thumbnail glock flag

3D printed 9 mm Chamber Safety Flag for Glock handgun

Even if a gun doesn’t have a magazine it could still have a bullet in the chamber and it is potentially dangerous, there is no indication in most guns to check if there is a live round on the gun, the user must then operate the gun in order to make sure is safe. Remember to always perform multiple safety checks on any gun you need to handle. A Chamber Safety Flag is a tool which indicates that a weapon… Read More »3D printed 9 mm Chamber Safety Flag for Glock handgun

printedocarinathumbnail

3D printed Ocarina – Zelda songs

Fully playable ocarina printed on PLA using a RepRap Prusa I3 3D Printer. Operation Description and files download to recreateOriginal 3D design taken from: by Seggybop Material: PLA Color: Clear Yellow Nozzel Temperature: 230°C Bed Temperature: 50°C Nozzel Diameter: 0.4 mm Printing Speed: 50 mm/s Time Printing: 6h7m (A) + 6h56m (B) Layer Height: 0.1 mm Total Layers: 279 (A) + 437 (B) Total Lines: 360118 (A) + 444728 (B) Filament Needed: 12807 mm (A) + 14312 mm (B) Download… Read More »3D printed Ocarina – Zelda songs

3Dprintedtriforcethumbnail

3D printed Triforce Medalion – Zelda Ocarina Of Time

Zelda’s Triforce Medallion printed on PLA using a RepRap Prusa I3 3D Printer. Operation Description and files download to recreate: Material: PLA Color: Clear Yellow Nozzel Temperature: 230°C Bed Temperature: 50°C Nozzel Diameter: 0.4 mm Printing Speed: 50 mm/s Time Printing: 6h20m Layer Height: 0.1 mm Total Layers: 68 Total Lines: 47967 Filament Needed: 3270 00 Download Files

leap thumbnail

Leap Motion on Ubuntu 14.04

Leap Motion its a very simple and cheap motion sensor for workstations
optimized to detect hand movements, the development environment allows to
capture optimized raw data and used on endless aplications.

ServoModelsThumbnail

3D Detailed Model Of Common Servo Motors – Also for 3D printing

DOWNLOAD CAD FILES: Download MG995 – High Torque Servo Motor – Tower Pro MG995 Servo Motor  Round Clip Servo “C” “U” Bracket Servo Multi-Purposel Bracket 9g – Micro Servo Motor – Tower Pro 9g Micro Servo Motor Clip Well designed models of robotics structures require detailed parts and assemblies to ensure the feasibility of the construction process and its operation. Here some essential servo motors used for robotics, aeromodelling and an RF device:

Arduino RF module thumbnail

Arduino with RF module, custom data transmission.

Some usual RF devices are those digital modules where a button or command generates an digital output on the receptor, this limits the amount of control that can be generated on the receptor to a few “channels”. In most cases some “complex” custom comunication is required, where the RF modules need to handle any type and size of information the process require. In this case an Arduino board connected to a RF transmitter that send the strings it recives via… Read More »Arduino with RF module, custom data transmission.